Polyurethane Physical Properties
| Property | Test Method | Result |
|---|---|---|
| Hardness (Shore A) | ASTN D-2240 | 65-70 |
| Tensile Strength | ASTN D-412 | 5.3MPa |
| Elongation | ASTN D-412 | 140% |
| Abrasion Resistance | ASTN C501-66 | 14g/1000 c |
| Flammability Rating | UL94HB | Pass |
| Coefficient of Friction ASTM D – 1894 – 78 |
|
| A Stainless Steel | 5.69 |
| B Glass | 2.9 |
| C Formica | 2.52 |
| D Smooth PVC Floor Tile | 2.62 |
| E High Impact Polystyrene | 2.53 |
| Shelf Life – 12 Months when stored at room temperature |
All Eazi-stop Bumpers are supplied with a high performance pressure sensitive acrylic adhesive system, that is resistant to plasticizer attack and will withstand elevated temperatures.
Temperature
| Acrylic Adhesive | ||
|---|---|---|
| Application Temp | 4’c to 65’c | |
| End Use Temp | -30’c to 100’c |
Adhesion Bonding Guide
| Surface Material | Acrylic Adhesive | |
|---|---|---|
| Stainless Steel | Good | |
| Aluminium | Very Good | |
| Glass | Good | |
| Acrylic Plastic | Good | |
| Polystyrene | Good | |
| ABS | Good | |
| Polycarbonate | Good |
Application - It is important to remember that, as with any self-adhesive product, the surface to which you are applying the Eazi-Stop must be clean, dry and free from dust, dirt and any other contaminates. It is important therefore to clean the surface thoroughly, using a low strength solvent and following the manufacturers instructions for safety. As in all applications it is up to the user to satisfy themselves as to the suitability of the product for the intended application.