Eazi-Guard™ & Frame-guard™ Stone Chip Protection Tape

We provide three types of stone chip protection tape, each with unique performance characteristics  for the industries and applications concerned:

Frame-guard bike stone chip protection tape – Available in gloss and matte, for todays steel, aluminium and carbon fibre framed pedal bikes.

Eazi-Guard motorbike stone chip protection tape – Highly pliant and conformable, for use on ABS and carbon fibre fairings, alloy chassis rails, mirrors, panniers and top boxes for motorbikes. Available in pre-cut kits, that are model specific, or in Universal Sheets and Rolls.

Ultra Resilient stone chip protection tape – Heavier duty for use in specialist and demanding applications, such as wind turbine blade protection, helicopter rotor blade protection and even the leading edge of nose cones and barge boards of Formula 1 cars.

 

Eazi-Guard & Frame-guard Protection Tape

Frame-guard Bike Protection Tape

If you’re serious about cycling or simply want to protect the investment you’ve made in your road or mountain bike, choose Frameguard™ bike frame stone chip protection tape to keep your bike looking as good as new. Easy to apply and completely transparent, Frameguard stone chip protection tape is also referred to as Helicopter Tape – from its original use to protect light aircraft from abrasive airborne particles such as sand, grit, volcanic dust etc. The unique properties of our bike frame protection tape enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your frame untouched beneath.

Frame Guard Protection Tape demonstration video

 

Frameguard Packaging

Frame Guard protection film demonstration video
Visit: www.frame-guard.co.uk for more details

Easy to apply and UV resistant so it won’t yellow, Frame-guard stone chip protection tape has been specifically designed with today’s steel, aluminium and carbon fibre frames in mind, especially useful for the latter as the surface of carbon fibre is particularly susceptible to impact damage. Frame-guard bike frame protection tape stays where you put it with a super-strong bond, but can be removed without leaving any residue on your frame. Whether you use our Frameguard Tape on your crank arms to prevent shoe scuffs, or apply it to your frame to save your paintwork from stones, grit, sand or even chain slap, our stone chip protection tape conforms easily to curves for a smooth finish.

For retail customers click here to buy online from our approved E Bay stockist or contact our sales office on 01772 459931 for a trade price list.

Frame-guard is available in three standard kits, die-cut to suit most modern road and mountain bikes and comes in both Matte and Gloss finishes. Alternatively, we can supply custom kits for re-sellers to any specific requirements. Our sophisticated CNC plotters and die-cutting presses enable us to accommodate almost any shape and size, equally we can supply our tape in roll and sheet format if required.

Product Features

  • Ultra high clarity clear protection
  • Self Healing
  • Excellent UV resistance
  • Protects against stone chips, scratches, dirt and grit
  • Easily removable and residue-free
  • Extremely Tough

For further information on our products, please complete our  online enquiry form, or contact us direct and speak to our sales office, on 01772 459931, who will be delighted to assist you.

 

Eazi-Guard Motorbike Stone Chip Protection Tape

Eazi-Guard stone chip protection tape is designed specifically for motorbike applications; protecting bodywork from chaffing where bungee straps are used to secure luggage, to protect paniers from shoe scuffs when mounting and dismounting and general applications protecting fairings, mirrors and even screens from the damaging effect of airborne particle damage. For race bikes, it is used to prevent chippings and stress fractures on the fairing, nose cone and belly pan and is also used to protect from gravel rash on alloy chassis rails and frames. For Race and Track bikes; stone chips, abrasions, stress fractures and scratches can quickly damage fairings, forks and bodywork. For Road bikes, the harmful effects of road salt, tar and airborne particles can dramatically reduce the resale value of your bike.

Eazi-Guard™ stone chip protection film is a Non-Yellowing, Ultra-Thin, Ultra-Tough, polyurethane protection film, designed to protect your bike and virtually eliminate damage. The unique properties of our Protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.

Eazi-Guard™ Stone Chip Protection Kits are easy to fit, with sectional pieces, that in conjunction with our advanced fitting solution, simply float into place. Eazi-Guard™ Kits are extremely conformable around even tight radii and compound curves, making them Eazi to fit at home. Standard kits cover the tip of the front mudguard, front fork shields, nose cone, leading edges of the fairings and tail unit. For customers requiring more than just the ‘standard’ coverage, for example paniers, top boxes, wing mirrors, headlights or any other requirements, we have an in-house design team that can produce bespoke patterns.

Together with our standard range of pre-cut kits, we also offer rolls in 75mm, 100mm & 150mm widths , ideal for protecting front forks, chassis rails and swingarms. Eazi-Guard is an essential addition for every toolbox.

 

Ultra Resilient Protection Tape (helicopter tape)

Stone chip protection tape is often referred to as helicopter tape; this is because it was originally designed to protect aircraft from damage. The tape would be applied to the propellers, wings, struts and stabilisers to protect them from damage by absorbing the impact caused by small objects colliding with the surface and from the elements.

key image

We sell our Ultra Resilient stone chip protection tape (helicopter tape) in self-adhesive rolls or can die cut into intricate shapes. The tape is highly resilient, hardwearing, resistant to weathering, and long-lasting. Helicopter tape can also protect surfaces from ice adhesion and dirt residue which can be damaging over a long period of time. The tape is invisible and UV resistant meaning that it won’t yellow in the sun, so the overall appearance of the surface it is applied to will not be affected.

For further information on our products, please complete our  online enquiry form, or contact us direct and speak to our sales office, on 01772 459931, who will be delighted to assist you.