July 25, 2013

Bumper Feet Technical Data

Polyurethane Physical Properties

  Property    Test Method   Result
Hardness (Shore A) ASTN D-2240  65-70
Tensile Strength ASTN D-412  5.3MPa
Elongation ASTN D-412 140%
Abrasion Resistance ASTN C501-66 14g/1000 c
 Flammability Rating UL94HB Pass


Coefficient of Friction ASTM D – 1894 – 78
A Stainless Steel 5.69
B Glass  2.9
C Formica 2.52
D Smooth PVC Floor Tile 2.62
E High Impact Polystyrene 2.53
Shelf Life – 12 Months when stored at room temperature

All Eazi-stop Bumpers are supplied with a high performance pressure sensitive acrylic adhesive system, that is resistant to plasticizer attack and will withstand elevated temperatures.


  Acrylic Adhesive
Application Temp 4’c  to  65’c
End Use Temp -30’c to 100’c

Adhesion Bonding Guide

Surface Material Acrylic Adhesive
Stainless Steel Good
Aluminium Very Good
Glass Good
Acrylic Plastic Good
Polystyrene Good
ABS Good
Polycarbonate Good

Application  –  It is important to remember that, as with any self-adhesive product, the surface to which you are applying the Eazi-Stop must be clean, dry and free from dust, dirt and any other contaminates. It is important therefore to clean the surface thoroughly, using a low strength solvent and following the manufacturers instructions for safety. As in all applications it is up to the user to satisfy themselves as to the suitability of the product for the intended application.


For further information on our products, please complete our  online enquiry form, or contact us direct and speak to our sales office, on 01772 459931, who will be delighted to assist you.

Plugin for Social Media by Acurax Wordpress Design Studio